Rockwell Automation 8510 AC Spindle Drive System User Manual - Manual (Page 109)

Display Panel & Fault Diagnostics
Chapter 10
10-105
Display Operation The 4 button keypad (see Figure 10.3) is used to access the status and
diagnostic systems. Key functions are explained below.
Figure 10.3
8510 Keypad and Display
Display
Keypad
Pressing this key will cause the display to change to the
previous menu level within the DISPLAY TYPE menu
section. If the top item of the menu is shown, the Mode key
will have no effect.
Pressing this key will cause the sub-menu or parameter
shown on line 2 of the display to become the active menu or
parameter. This sub-menu or parameter name will move to
line 1 and the new menu choices or parameter value will now
be displayed.
Pressing this key once will cause the parameter or sub-menu
names shown on line 2 of the display to increment to the
next possible choice for the menu listed on line 1. If this key
is pressed and held, the display will continuously index
through the possible selections until the key is released.
When the end of the menu list is reached, it will roll over to
the beginning and continue to increment.
The function of this key is identical to the Scroll+ key except
that it causes the display to decrement rather than increment.
Key Combinations
Pressing the Mode and Scroll – keys will cause the display to jump to the
first menu in the section.
Figure 10.4 provides a diagram showing the keys needed to select the
various items of the DISPLAY TYPE menu.