Rockwell Automation 1771-QDC, D17716.5.86(Passport) PLASTIC MOLDING MODULE - Manual (Page 60)

Overview of Remaining
Configuration Procedures
Chapter 4
4-5
Learn the following procedure because you will use it often.
1. For the block you want to download (subject block), get its ID
number from Table 4.A and enter it into DYC61.
Table 4.A
Information Required to Download a Command Block
Block to
Download:
ProĆSet 600
Block ID.:
ProĆSet 600
Download Command Bit:
Companion
Block:
JGC 02 B21/1
FCC 03 B21/2 CPC
SCC 04 B21/3 CPC
TCC 05 B21/4 CPC
LPC 06 B21/5 CPC
CPC 07 B21/6
INC 08 B21/7 IPC
IPC 09 B21/8
PKC 10 B21/9 HPC
HDC 11 B21/10 HPC
HPC 12 B21/11
PRC 13 B21/12
PLC 14 B21/13 PPC
PPC 15 B21/14
PSC 16 B21/15
FOC 17 B21/16 OPC
SOC 18 B21/17 OPC
TOC 19 B21/18 OPC
OSC 20 B21/19 OPC
OPC 21 B21/20
2. Confirm that the QDC module returns the ID in SYS61.
Important: If the value returned in SYS61 is NOT the ID number
you entered, you have an error in the MCC or DYC block:
If SYS61 has
this value:
This block
has errors:
Fix them as follows:
1 MCC Refer to chapter 3 Correct Any DataĆentry Errors in MCC"
25 DYC Go to steps 8 and 9 of this procedure.
Fix MCC and DYC errors before starting the download procedure
MCC and DYC errors are corrected when SYS61
≠
1 or 25, but
when SYS61=DYC61=ID number of the subject block