Sensaphone 2800 User Manual

Page 95

Chapter 6: Controlling the Output

Mode 6

: Output on when zone 6 goes into alarm. Off when alarm

is acknowledged.

Mode 7

: Output on when zone 7 goes into alarm. Off when alarm

is acknowledged.

Mode 8

: Output on when zone 8 goes into alarm. Off when alarm

is acknowledged.

Mode 9

: Output on when a Sound alarm occurs. Off when alarm is

acknowledged.

Mode 10

: Output on when a Power alarm occurs. Off when alarm

is acknowledged.

Mode 11

: Output on when any alarm occurs. Off when all alarms

are acknowledged.

MANUAL MODE

Mode 0

: Output controlled manually via keypad command or

touch-tone telephone.

When programmed for Manual mode, the command to switch the
output is:

SENSOR ON/OFF + OUTPUT.

The 2800 will respond “ON” or “OFF” to indicate the state of the
output.

Note: If the 2800 says “Error,” the output is not

programmed for manual mode.