Sensaphone 2800 - Manual (Page 123)

Chapter 8: Sensors
121
WSR-0103 WIRELESS INDOOR HUMIDITY SENSOR
INTRODUCTION
The WSR-0103 Wireless Indoor
Humidity sensor is designed to work
with the Sensaphone 2800 Environmental
Monitoring System. This sensor includes
a built-in radio transmitter and humidity
sensor element for monitoring humidity
wherever the device is installed. The sensor
comes with 3 AAA alkaline batteries
which will power the sensor for up to 3
years. An optional plug-in power supply is
also available in which case the batteries
become a backup if main AC power fails.
NOTE: Do not install the entire sensor housing in a dirty
or corrosive environment. Do not install the sensor in close
proximity to other 2.4GHz devices (WiFi etc). Do not install
the device inside of a metallic enclosure as this will impede it’s
ability to wirelessly communicate with the Sensaphone 2800
unit.
Package Contents
(1) WSR-0103 Wireless Indoor Humidity Sensor
(3) AAA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
(1) 1/16” hex key