Sensaphone 2800 - Manual (Page 37)

Chapter 4: Zone Programming
35
WiFi Channel Recommended 2800
Wireless Channel
1 3 or 4
2 3 or 4
3 3 or 4
4 3 or 4
5 1, 3 or 4
6 1 or 4
7 1 or 4
8 1, 2, or 4
9 1 or 2
10 1 or 2
11 1 or 2
12 1, 2, or 3
13 1, 2, or 3
14 1, 2, or 3
SETTING THE WIRELESS COMMUNICATIONS CHANNEL
The Sensaphone 2800 and associated sensors must be set to operate
on the same wireless channel. There are four possible channels. If
you will be installing more than one 2800 in the same area you must
configure each system on its own channel. By default, the 2800 and
sensors are set to channel 1. To change the channel on the sensor(s)
you must remove the cover and configure the jumpers (see chapter
8). On the 2800 you can set the channel number using the following
key sequence.
1. Press SET CONFIGURE keys.
2. Press the # key.