Sensaphone 2800 - Manual (Page 104)

Sensaphone 2800 Manual
102
The commands are put together based on the letters of a touch-tone
telephone. See typical telephone keypad layout below.
Figure 1: A telephone keypad
Many of the commands use three letters that represent an
abbreviation of the selected command. For example, to Set a High
limit on Zone 1 you would press S + H + 1 (or in numeric form 7 +
4 + 1)
The tables below list all of the touch-tone commands that are
supported. Commands are listed in both character and numeric
formats. The # key is used as an ENTER key. Use the * key to
represent a negative sign or to represent the [CODE] key when
programming telephone numbers.
Enable/Disable Zones
This command will toggle the selected zone between the
enabled or disabled state.
Description Touch-Tone Command
Enable/Disable Zone * + Z(0) + (zone number)
Set and Recite High & Low Alarm Limits
The following commands are used to set or recite the Low
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone Low Limit S(7) + L(5) + (zone number) + (value) + #