Sensaphone 2800 - Manual (Page 128)

Sensaphone 2800 Manual
126
WSR-0104 WIRELESS INDOOR 4-20MA SENSOR
INTRODUCTION
The WSR-0104 Wireless Indoor
4-20mA sensor is designed to work with
the Sensaphone 2800 Environmental
Monitoring System. This sensor includes
a built-in radio transmitter, 4-20mA input
and a 24V loop power supply. The sensor
can be used to monitor the output of any
4-20mA transducer. The sensor comes with
a plug-in power supply and 3 AAA alkaline
batteries which will power the sensor for
several hours if main AC power fails.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor
in close proximity to other 2.4GHz devices (WiFi etc). Do
not install the device inside of a metallic enclosure as this
will impede it’s ability to wirelessly communicate with the
Sensaphone 2800 unit.
Package Contents
(1) WSR-0104 Wireless Indoor 4-20mA Sensor
(3) AAA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
(1) 1/16” hex key
(1) DC power supply