Sensaphone 2800 - Manual (Page 106)

Sensaphone 2800 Manual
104
Description Touch-Tone Command
Play a Message W(9) + M(6) + (entry 0–8)
Control the Relay Output
The following commands will allow you to check the status of
the relay output and to toggle the Relay Output On and Off.
Description Touch-Tone Command
Reciting the Output Status W(9) + R(7) + O(6)
Description
Touch-Tone Command
Switching the Output S(7) + R(7) + O(6)
Activate Microphone Listen-in
The following command will allow you to activate the
microphone listen-in for the programmed duration.
Description Touch-Tone Command
Activate Mic Listen-in M(6) + I(4) + C(2)
Request Status Report
The following command will initiate a status report.
Description Touch-Tone Command
Recite status report W(9) + S(7) + R(7)
Request Alarm History
The following command will recite the alarm history.
Description Touch-Tone Command
Recite alarm history H(4) + I(4) + S(7)
Hang-up
The following command will make the 2800 hang up the
telephone line.
Description Touch-Tone Command
Hang-up the phone line B(2) + Y(9) + E(3)
NOTE: If a security code is enabled, the 2800 will
prompt you with “Enter security code.” Enter the
four-digit keypad security code plus “ #” to enter
touch-tone command mode. If entered correctly, the