Sensaphone 2800 - Manual (Page 79)

Chapter 5: Communication Programming
77
To hear the Alarm History:
1. Press the WHAT IS key.
2. Press the HISTORY key.
The unit will recite the history for the last 10 alarms. A sample
report is shown below:
“Zone 1 (custom message) alarm high at 3:31
pm
April 8, 2007
acknowledged by number 4”
“Zone 8 (custom message) alarm low at 2:35
am
March 27, 2007
acknowledged by number 1”
In Single-User mode, the report will state “Alarm acknowledged”
for alarms acknowledged via telephone. It will state “Manual
acknowledgment” for alarms acknowledged at the keypad. In
Multiple-User mode, the report will state the user number that
acknowledged the alarm. If the maximum number of calls have been
made, the report will state “Automatic acknowledgment.”
Deleting the Alarm History:
The Alarm History can be deleted by pressing SET, then HISTORY.
The 2800 will say “Erased.”
TONE OR PULSE DIALING
The 2800 can dial out in pulse or touch-tones. All numbers will be
called using the chosen dialing method. The default is TONE.