Sensaphone 2800 - Manual (Page 142)

Sensaphone 2800 Manual
140
WSR-0107 WIRELESS ZONE WATER DETECTION SENSOR
INTRODUCTION
The WSR-0107 Wireless
Zone Water Detection
Sensor is designed to work
with the Sensaphone 2800
Environmental Monitoring
System. This sensor
includes a built-in radio
transmitter and ten feet of
water sensing cable for monitoring for the presence of water in a
particular area. The size of the monitored area can be extended by
attaching additional lengths of WaterRope (FGD-0063) to the end
of the included WaterRope. You can connect up to ten lengths of
WaterRope (100’) to one Zone Water Detector. The sensor comes
with 3 AA alkaline batteries which will power the sensor for up to 3
years.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor in
close proximity to other 2.4GHz devices (WiFi etc).
Package Contents
(1) WSR-0107 Wireless Zone Water Detection Sensor
(1) 10’ WaterRope
(5) Adhesive cable clamps
(3) AA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 metal tapping screws
(4) Rubber feet