Sensaphone 2800 User Manual
Page 59
Chapter 4: Zone Programming
57
To use exit delay, initiate the Status Report .
1. Press WHAT IS.
2. Press STATUS.
The 2800 recites the full Status Report; during this time, you are
able to exit the monitored area without tripping an alarm.
TEMPERATURE-ONLY STATUS REPORT
You can receive a limited status report that only includes inputs
configured as temperature. This can be useful when you don't care
to listen to the entire status report.
To initiate a Temperature-only Status Report:
1. Press the WHAT IS key
2. Press the TEST key.