Sensaphone 2800 - Manual (Page 57)

Chapter 4: Zone Programming
55
To play back the Sound Level calibration:
1. Press the WHAT IS key.
2. Press the CALIBRATE key. 2800 will say “Enter Zone
Number.”
3. Press the SOUND key.
The 2800 will recite the programmed sound sensitivity level.
DESIGNATING A ZONE AS UNUSED
This feature allows you to mark selected Hard Wired Zones, Power,
or Sound as unused, which will prohibit them from going into alarm
and will also leave them out of the status report.
NOTE: Programming for the selected Zone will be
preserved when the Zone is marked as “unusued”
and will not be reconfigured if automatic Zone con-
figuration is activated.
To designate a Zone as unused:
1. Press the SENSOR ON/OFF key.
2. Press the SET key.
The 2800 will say “Enter Zone Number.”