Sensaphone 2800 - Manual (Page 108)

Sensaphone 2800 Manual
106
CHAPTER 8: WIRELESS SENSORS
WSR-0100 WIRELESS INDOOR TEMPERATURE SENSOR
INTRODUCTION
The WSR-0100 Wireless Indoor
Temperature sensor is designed to work
with the Sensaphone 2800 Environmental
Monitoring System. This sensor includes a
built-in radio transmitter and temperature
element for monitoring temperature
wherever the device is installed. You can
also remove the internal temperature
element and connect a remote temperature
probe so that measurements can be made
in a refrigerator/freezer or other harsh
environment. The sensor comes with 3 AAA alkaline batteries
which will power the sensor for up to 3 years. An optional plug-in
power supply is also available in which case the batteries become a
backup if main AC power fails.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor
in close proximity to other 2.4GHz devices (WiFi etc) .Do
not install the device inside of a metallic enclosure as this
will impede it’s ability to wirelessly communicate with the
Sensaphone 2800 unit.
Package Contents
(1) WSR-0100 Wireless Indoor Temperature Sensor
(3) AAA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
(1) 1/16” hex key