Channel selection, Figure 3: surface mounting the sensor, Figure 4: corner mounting the sensor – Sensaphone 2800 User Manual
Page 135
Chapter 8: Sensors
133
(Figure 3) or in a corner mount position (Figure 4). Recommended
(most effective) mounting height is 4.5 feet.
WALL
Mounting Screws
Figure 3: Surface mounting the Sensor
WALL
W
ALL
Mounting Screw
Mounting Scre
w
Figure 4: Corner Mounting the Sensor
CHANNEL SELECTION
The Sensaphone 2800 and associated sensors must be set to operate
on the same wireless channel. There are four possible channels. If
you will be installing more than one 2800 unit in the same area you
must configure each system on its own channel. By default the 2800
and sensors are set to channel one. Locate the jumpers on the circuit
board as shown in the figure below. Remove all power from the
sensor by taking out the alkaline batteries. The table shows how to
configure the jumpers for a particular channel.