Sensaphone 2800 User Manual
Page 81
Chapter 5: Communication Programming
79
The 2800 will say “OK.”
To play back the Rings Until Answer:
1. Press the WHAT IS key
2. Press the RINGS key.
The 2800 will recite the programmed value.
CALL DELAY TIME
The call delay time is the length of time the 2800 will announce an
alarm before it starts the dial-out sequence. This only applies to the
first call. To set delay time between calls, see INTERCALL TIME.
The default call delay time is 30 seconds. It can be programmed
from 0 to 60 minutes. The purpose of Call Delay is to allow time for
personnel at the 2800’s installation sight to respond to and cancel an
alarm before dial-out begins. During this time, the unit will audibly
repeat its “alarm” message and the front panel alarm LED will
blink.
To program call delay time:
1. Press the SET key.
2. Press the CALL DELAY key.
The 2800 will say “Enter minutes.”