Sensaphone 2800 - Manual (Page 76)

Sensaphone 2800 Manual
74
ALARM ACKNOWLEDGMENT CODES
When the 2800 detects an alarm, it starts dialing each telephone
number until it receives acknowledgment or reaches the maximum
number of calls. There are two acknowledgment modes: The default,
Single-User mode, is for users who are not concerned with knowing
who responds to and acknowledges the alarm. In this mode, the
default code of “555” is used. In Single-User mode an alarm can
be acknowledged by pressing the ALARM CANCEL button on the
keypad, or by entering the Acknowledgment Code of 555 over the
telephone using touch tones.
In Multiple-User mode, up to 8 custom Acknowledgment Codes
can be created in order to track who acknowledges alarms. These
are 5-digit custom codes, replacing the default “555.” The 5-digit
Acknowledgment Code comprises the user’s entry number (1–8)
plus a four-digit number. Up to eight different Acknowledgment
Codes may be programmed into the unit to identify individual users
in the Alarm History Log.
When the unit makes a telephone call in Voice mode it will prompt
the user to enter an Acknowledgment Code. If this is entered
correctly, the 2800 will say “Alarm Acknowledged.” When an
alarm message is sent to a pager, the person who receives the
page will have to call the unit back to acknowledge the alarm. In
Single-User mode, the user must enter “555” to acknowledge the
alarm. In Multiple-User mode, the user must enter his or her 5-digit
Acknowledgment Code.
To Program Multiple-User Acknowledgment Codes:
1. Press SET
2. Press CODE
The 2800 will say “Enter Code Number.”