Sensaphone 2800 - Manual (Page 113)

Chapter 8: Sensors
111
WSR-0101 WIRELESS INDOOR DRY CONTACT SENSOR
INTRODUCTION
The WSR-0101 Wireless Indoor Dry
Contact sensor is designed to work with
the Sensaphone 2800 Environmental
Monitoring System. This sensor includes
a built-in radio transmitter and input
terminals for connecting to any normally-
open or normally closed output. (Use of
this device with solid-state outputs is not
recommended.) The sensor comes with
3 AAA alkaline alkaline batteries which
will power the sensor for up to 3 years.
An optional plug-in power supply is
also available in which case the batteries
become a backup if main AC power fails.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor
in close proximity to other 2.4GHz devices (WiFi etc). Do
not install the device inside of a metallic enclosure as this
will impede it’s ability to wirelessly communicate with the
Sensaphone 2800 unit.
Package Contents
(1) WSR-0101 Wireless Indoor Dry Contact Sensor
(3) AAA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
(1) 1/16” hex key