Sensaphone 2800 - Manual (Page 69)

Chapter 5: Communication Programming
67
3. Select an assigned Phone number (keys 1–8).
The 2800 will recite the number programmed. If there is no number
programmed, 2800 will say “No number.”
To erase a dial-out telephone number:
1. Press the SET key.
2. Press the PHONE NUMBER key. The 2800 will say “Enter
Number.”
3. Select an assigned Phone Number (keys 1–8), and press
ENTER.
The 2800 will say “Number (1–8) erased.”
Numeric Pager Dialout
When programming the 2800 to dial a Numeric pager there are two
methods that can be used:
Automatic mode and Manual mode.
The only difference is that in Automatic mode the 2800 will
automatically try to sense when the call has been answered and
then send the ID Number and zone numbers. In some instances,