Sensaphone 2800 User Manual
Page 63
Chapter 5: Communication Programming
61
2. Press the MESSAGE key.
3. Press the ID key (number 0 key).
The 2800 will play back your recorded message.
The
Zone Messages are used to identify the device or condition
being monitored such as temperature, humidity, equipment alarms,
security alarms, etc.
To program the Voice Message for a Zone:
1. Press the SET key.
2. Press the MESSAGE key. The 2800 will say, “Enter Message
Number.”
3. Press the number key for the corresponding Zone.
4. When the unit beeps, begin speaking your message into the
enclosure near the Zone 4 LED. The unit will say “OK,” when
the recording time has elapsed; then it will play back your
recorded message.