Sensaphone 2800 - Manual (Page 118)

Sensaphone 2800 Manual
116
WSR-0102 WIRELESS POWER FAILURE SENSOR
INTRODUCTION
The WSR-0102 Wireless Indoor Power
Failure sensor is designed to work with
the Sensaphone 2800 Environmental
Monitoring System. This sensor includes
a built-in radio transmitter, AAA alkaline
batteries and a wall plug in power supply.
The sensor will detect a loss of power
at the outlet where the power supply is
attached. The 3 AAA alkaline batteries will
power the sensor and allow it to transmit
alarm information in the event that AC
power fails.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor
in close proximity to other 2.4GHz devices (WiFi etc). Do
not install the device inside of a metallic enclosure as this
will impede it’s ability to wirelessly communicate with the
Sensaphone 2800 unit.
Package Contents
(1) WSR-0102 Wireless Indoor Power Failure Sensor
(3) AAA Alkaline batteries
(2) Plastic drywall anchors
(2) #6 Metal tapping screws
(1) 1/16” hex key
(1) DC power supply