Sensaphone 2800 - Manual (Page 90)

Sensaphone 2800 Manual
88
record messages, you must call in and unlock the 2800 by entering
the four-digit lock/unlock code.
If you enter the correct code, you will gain access to the 2800 to use
the phone commands. If you enter the incorrect code, the 2800 will
say “Error 2” and allow you a second chance to enter the correct
code. If the second attempt is also wrong, the unit will say “Error 2,
good-bye” and disconnect. You cannot program or change the lock
code remotely.
For an explanation of how to use remote programming, see Chapter
Seven.
To set the security code:
1. Press the SET key.
2. Press the LOCK key.
The 2800 will say “Enter security code.”
3. Using the number keys, enter 4 digits, and press ENTER.
The 2800 will say “OK.”