Sensaphone 2800 - Manual (Page 65)

Chapter 5: Communication Programming
63
3. Press the Zone Number or ID key.
The 2800 will say, “Message erased.”
ID NUMBER
The ID Number is the identification number of the 2800. This
number is typically the telephone number where the unit is installed,
or it may be designated using any number that best suits your
application. The purpose of the ID Number is to immediately
provide the source of any alarm, especially when using multiple
2800 units in a complex monitoring system. The ID number is
announced during voice alarm messages and displayed on pagers.
The ID Number can be up to 16 digits long.
When the 2800 is called from a remote location, it always begins
its message with the identification number: “Hello, this is (ID
Number).” If no ID Number is programmed, the unit will say,
“Hello, this is Sensaphone 2800.”
To program the ID Number:
1. Press the SET key.
2. Press the ID key (number 0 key).