Sensaphone 2800 User Manual
Page 62
Sensaphone 2800 Manual
60
VOICE MESSAGES
The 2800’s digital speech recording feature allows you to record
custom messages for each of the eight Zones and an ID Message.
This means that when the 2800 calls you during an alarm, you
will hear a personalized Voice Message identifying the unit and
telling you exactly what alarm condition exists. You can record a
separate message for each of the eight Zones. The message can run
a maximum of 4.6 seconds. The ID Message can be a maximum
of 5.3 seconds. You can shorten the message length by pressing the
ENTER key after reciting the message.
The
ID Message is used to identify the unit. This could be a
particular building name, its location (address or city), or some
other identifier.
To program the ID Message:
1. Press the SET key.
2. Press the MESSAGE key. The 2800 will say “Enter Message
Number.”
3. Press the ID key (number 0 key).
4. When the unit beeps, begin speaking your message into the
enclosure near the Zone 4 LED. The unit will say “OK,” when
the recording time has elapsed; then it will play back your
recorded message.
To play back the ID Message:
1. Press the WHAT IS key.