Sensaphone 2800 User Manual
Page 75
Chapter 5: Communication Programming
73
2. Press the TEST key.
The 2800 will say “Enter Number.”
3. Press a number key (1–8) corresponding to the phone number
entry you wish to test, and press ENTER.
The 2800 will dial the number and announce the date and time for
voice calls, or send its ID number for pager calls.
To manually dial a phone number:
1. Press the SET key.
2. Press the TEST key.
The 2800 will say “Enter number.”
3. Press 0 then enter to enter manual dialing mode. The 2800
will go off-hook and you should hear a dial tone through the
speaker. Press any number keys to dial a telephone number.
4. Press ALARM CANCEL to hang up and exit the test.