Sensaphone 2800 - Manual (Page 105)

Chapter 7: Operation
103
Description Touch-Tone Command
What Is Zone Low Limit W(9) + L(5) + (zone number) + (value)+ #
The following commands are used to set or recite the High
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone High Limit S(7) + H(4) + (zone number) + (value)+ #
Description Touch-Tone Command
What Is Zone High Limit W(9) + H(4) + (zone number) + (value)+ #
Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers. You may need to use the Special
Dialing Codes below.
Special Dialing Codes Summary
Code 1: Numeric pager type
Code 2: Wait for answer
Code 3: Change to Touch-Tone
Code 4: Pause
Code 5: *
Code 6: #
Description Touch-Tone Command
Setting a phone number S(7) + T(8) + (entry 1–8) + (telephone
number) + #
Description Touch-Tone Command
Reciting a phone number W(9) + T(8) + (entry 1–8)
Record and Play Custom Voice Messages
The following commands will allow you to record and play
back custom voice messages for the ID message (0) and each
zone (1–8).
Description Touch-Tone Command
Record a Message S(7) + M(6) + (entry 0–8)