Sensaphone 2800 - Manual (Page 91)

Chapter 5: Communication Programming
89
To play back the security code:
1. Press the WHAT IS key.
2. Press the LOCK key.
The 2800 will recite the security code.
To remove the security code:
1. Press the SET key.
2. Press the LOCK key.
The 2800 will say “Enter security code.”
3. Press ENTER.
The 2800 will say “Security code erased.”
SPEAKER MUTE
When the 2800 dials out with an alarm, it recites the alarm message
over the phone and from its internal speaker. The Speaker Mute
command allows you to silence the 2800’s internal speaker.
To Mute the speaker:
1. Press the SENSOR ON/OFF key.