Sensaphone 2800 - Manual (Page 32)

Sensaphone 2800 Manual
30
When preparing wire for connection to the terminal blocks, strip 4"
of insulation from the conductor (see figure below).
.25"
Figure 6: Wire stripped for connection
RECOMMENDED ANTENNA ORIENTATION
For optimal wireless performance it is recommended that the
antennas of your sensors and 2800 be oriented as shown below. Note
that the transmit power is strongest when the antenna’s are parallel
to one another as shown by the larger transmit arrows. Orienting
the antennas properly will improve signal strength and reduce
the number of packet errors that may be caused by antenna cross
polarization.
Strong Transmit Power Weak Transmit Power
Optimal Antenna Orientation
Sensor Antenna 2800 Antenna
LED INDICATORS
The LEDs provide on-site alarm and status information. Listed
below are descriptions of how the LEDs work.
Wired and Wireless Zones:
LED Off: Zone is unused
LED Steady Green: Zone is normal
LED Blinking Green: Alarm condition exists but has
not met recognition time
LED Blinking Red: Unacknowledged alarm exists