Sensaphone 2800 - Manual (Page 58)

Sensaphone 2800 Manual
56
3. Press the corresponding number of the Zone you wish to mark
as unused.
The 2800 will respond by saying Zone 1–8, Power, or Sound “Off/
On.” Repeat the key sequence to place the Zone back in use.
EXIT DELAY
The Exit Delay feature is useful when you are using your 2800
for security monitoring. This feature allows you to exit a building
without tripping a security alarm. When tripping an alarm is
unavoidable, yet a true alert condition has not actually occurred, the
alarm response—including dial-out—can be temporarily suppressed.
The 2800 is able to suppress and then reset its dial-out function
automatically through use of the Status Report. This is especially
convenient when an alert condition is created upon exiting a
monitored door, and there is no way to cancel from the local
keypad.
NOTE: The Exit Delay feature applies only to hard-
wired Zones configured as NO/NC, wireless NO/
NC sensors and wireless passive infrared sensors.
Example: You are planning to exit through a monitored door. Prior
to exiting, you initiate a Status Report recitation at the 2800 keypad
by pressing [WHAT IS], followed by [STATUS], (key sequence
shown below). This allows you the duration of the status report to
exit without activating the 2800’s programmed response to an alarm.
At the conclusion of the status report, normal alarm response is
reactivated.