MacDon CA25 OM - Manual (Page 97)

SECTION 7. OPERATION
169593
95
Revision B
k. Remove pin (L), raise support (M) to position
shown, and re-insert pin (L).
IMPORTANT
Ensure pin (L) engages the tube on
the axle.
l. Swing brace (N) into position as shown, and
insert brace into slot (O) behind cutterbar.
Position brace so that pin (P) engages hole in
bracket (Q).
m. Right hand wheel is now in Transport position.
TRANSPORT POSITION - RH WHEEL
M
L
O
P
Q
N