MacDon CA25 OM - Manual (Page 34)

SECTION 7. OPERATION - CASE IH
169593
32
Revision B
4. Position onto adapter receptacle (G), and
push handle (K) to engage coupler pins into
receptacle.
5. Push handle to closed position until lock
button (J) snaps out.
g. Remove cover on adapter electrical receptacle
(N).
h. Remove electrical connector (M) from storage
cup on combine, and route to adapter
receptacle.
i. Align lugs on connector with slots in receptacle,
push connector onto receptacle, and turn collar
on connector to lock it in place.
j. Rotate disc (O) on adapter driveline storage
hook, and remove driveline from hook.
k. Pull back collar (P) on end of driveline, and
push onto combine output shaft (Q) until collar
locks.
l. Disengage both adapter float locks by moving
latch (R) away from adapter, and moving lever
(S) at each lock to lowest position.
J
G
M
K
S
LOCK
UNLOCK
R
P Q
O