MacDon CA25 OM - Manual (Page 84)

SECTION 7. OPERATION
169593
82
Revision B
Headers Without Latch Option
a. Open endshield.
b. Remove from storage.
c. Position crop divider as shown by locating lugs
(A) in holes in endsheet.
d. Lift forward end of divider, and install bolt (B)
and special stepped washer (C) (step towards
divider). Tighten bolt.
e. Check that divider does not move laterally.
Adjust bolts (D) as required to tighten divider
and remove lateral play when pulling at divider
tip.
f. Close endshield.
7.9.13 Rice Dividers
Optional special rice dividers can be installed
and used when required. See Section 10.10
RICE DIVIDER RODS.
The installation and removal procedures are the
same as for the standard crop dividers.
A
D
C
B
D