MacDon CA25 OM - Manual (Page 96)

SECTION 7. OPERATION
169593
94
Revision B
7.15.4.2 Right Side Wheels To Transport
Position
a. At wheels at the right end of header, remove
hairpin (A) from latch.
b. Lift latch (B), disengage right axle, and lower to
ground.
CAUTION
Stand clear of wheels and release linkage
carefully as wheels will drop once the
mechanism is released.
c. Carefully pull handle (C) to release the spring,
and let the wheel drop to the ground.
d. Lift wheel and linkage with handle (D), and
position linkage in second slot from bottom.
e. Lower handle (C) to lock.
f. Remove pin (E), and install at (F) to secure
linkage. Turn pin (E) to lock.
g. To position the left wheel (G), pull pin (H),
swivel wheel counterclockwise, and re-lock with
pin (H).
h. Left wheel is now in Transport position as
shown above.
i. Pull pin (J), swivel wheel clockwise as shown,
and lock with pin (J).
j. Swivel the right axle (K) to front of heade r .
(continued next page)
FIELD TO TRANSPORT - RH SIDE
E
F
H
G
FIELD TO TRANSPORT - RH SIDE
RELEASE
LOCK
C
D
A
B
K
FIELD TO TRANSPORT - RH WHEEL
FIELD TO TRANSPORT - LH WHEEL
FIELD TO TRANSPORT - RH SIDE
J