MacDon CA25 OM - Manual (Page 150)

SECTION 8. MAINTENANCE AND SERVICING
169593
148
Revision B
8.11.2.2 Draper Installation
a. Insert draper into deck at outboard end, under
the rollers. Pull draper into deck while feeding it
at the end.
b. Feed in the draper until it can be wrapped
around the drive roller.
c. Similarly insert the other end into the deck over
the rollers. Pull draper fully into the deck.
d. Attach ends of draper with tube connectors (D).
e. Install screws (C) with heads facing the center
opening.
f. Adjust tension. Refer to Section 8.11.1 Header
Draper Tension Adjustment.
C
D