beautypg.com

7 operation, Caution – MacDon CA25 OM User Manual

Page 25

background image

SECTION 7. OPERATION

169593

23

Revision B

7 OPERATION

7.1 OWNER/OPERATOR

RESPONSIBILITIES

CAUTION

It is your responsibility to read and

understand this manual completely
before operating the header. Contact
your MacDon Dealer if an instruction is
not clear to you.

Follow all safety messages in the

manual and on safety decals on the
machine.

Remember that YOU are the key to

safety. Good safety practices protect
you and the people around you.

Before allowing anyone to operate the

header, for however short a time or
distance, make sure they have been
instructed in its safe and proper use.

Review the manual and all safety related

items with all Operators annually.

Be alert for other Operators not using

recommended procedures or not
following safety precautions. Correct
these mistakes immediately, before an
accident occurs.

Do NOT modify the machine.

Unauthorized modifications may impair
the function and/or safety and affect
machine life.

The safety information given in this

manual does not replace safety codes,
insurance needs, or laws governing
your area. Be sure your machine meets
the standards set by these regulations.

7.2 OPERATIONAL SAFETY

Follow these safety precautions:

CAUTION

Follow all safety and operational

instructions given in your Operator's
Manuals. If you do not have a combine
manual, get one from your MacDon
Dealer and read it thoroughly.

Never attempt to start the engine or

operate the machine except from the
combine seat.

Check the operation of all controls in a

safe clear area before starting work.

Do NOT allow riders on combine.

Never start or move the machine until

you are sure all bystanders have cleared
the area.

Avoid travelling over loose fill, rocks,

ditches or holes.

Drive slowly through gates and

doorways.

When working on inclines, travel uphill

or downhill when possible. Be sure to
keep transmission in gear when
travelling downhill.

Never attempt to get on or off a moving

machine.

Do NOT leave Operator’s station while

the engine is running.

(continued next page)

This manual is related to the following products: