MacDon CA25 OM - Manual (Page 44)

SECTION 7. OPERATION - CAT LEXION
169593
42
Revision B
e. Disconnect hydraulics/electrical from adapter as
follows:
1. Unplug electrical connector (E) from
adapter receptacle.
2. Unscrew knob (F) on coupler (G) to release
coupler from adapter.
3. Remove cover (H) from combine
receptacle.
4. Locate coupler (G) onto combine
receptacle, and turn knob (F) to secure
coupler to receptacle.
5. Place cover (H) on adapter receptacle.
f. Remove locking pin (J) from adapter pin (K).
g. Raise handle (L) to disengage adapter pins (K)
from feeder house. Replace locking pin (J) in
adapter pin, and secure with hairpin.
h. Lower feeder house to ground until feeder
house posts (M) disengage adapter (N).
i. Slowly back combine away from adapter.
E
F
G
H
F
G
M
N
K
J
L
H