Apple PC Compatibility Card - Manual (Page 99)

16 Plug one of the two identical SCSI audio cables (with the plug shown below) into the
connector on the logic board.
IMPORTANT Use only the cables that came with this PC Compatibility Card.
Do not use cables from other models of the card.
Your PC Compatibility Card came with three audio cables. They may have
different colors of tubing near the ends to help you tell them apart. You’ll
only be using two of these cables (the third one is for a different kind of CD-
ROM drive). Two of the cables have identical plugs on the end, as shown
below. Use one of these two identical cables for this step.
Audio cable plug for
SCSI CD-ROM drives
99 Installing the Card in a Power Macintosh 8600 or 9600