Apple PC Compatibility Card - Manual (Page 127)

Connecting two monitors to your
Power Macintosh 7200, 7300, 7500, or 7600
To connect two monitors to your Power Macintosh 7200, 7300, 7500, or 7600,
follow these steps using your loopback cable:
You can leave the long connector unplugged. Or, if you have a video card and
want one monitor to switch between the Mac OS and PC environments, you
can plug the long connector into the video card port.
Plug the monitor you
want to use for the
Mac OS environment
into the built-in monitor
port (™) on the back
of your computer.
Mac OS PC
Mac OS PC
Mac OS PC
Plug the middle
connector on the
loopback cable into
the bottom port on the
PC Compatibility Card.
This connector has a
triple row of pins and
an Apple (K) icon on
either side.
Plug the short
connector on the
loopback cable into the
second monitor’s cable.
This connector has an
Apple (K) icon on one
side and a monitor (™)
icon on the other.
Long connector
1
2
3
127 Connecting Monitors and Other Equipment