Apple PC Compatibility Card - Manual (Page 272)

Using an OS/2 LAN Server with Windows for Workgroups
To set up Windows for Workgroups on an OS/2 LAN Server, follow
these steps:
1 Make sure you have an account on the OS/2 LAN server. Make sure that NETBEUI is
loaded and functioning.
If you are not sure, ask your system administrator.
2 Open the Main group, double-click the Control Panel icon, and then double-click the
Network icon.
3 In the box labeled Workgroups, assign your computer to the same workgroup that
contains the OS/2 LAN Server.
If you wish, add your user name on the LAN Server in the box labeled
Default Logon.
4 Restart the PC.
Next time you start Windows, you can log on using the user name assigned to
you in the OS/2 LAN Server group.
Installing client software for an OS/2 LAN server in DOS or Windows
Follow these steps to install the OS/2 LAN Server protocol for use with an
NDIS driver in DOS or Windows.
IMPORTANT Do not use these instructions for installing the OS/2 client in
Windows for Workgroups. Doing so may create problems with your network.
For more information, see the previous section, “Using an OS/2 LAN Server
With Windows for Workgroups.”
1 Create three installation floppies from the OS/2 LAN Server CD.
2 Insert the first floppy disk in the disk drive. Type the following:
A:\INSTALL
3 Verify the path name for the installation and press Return.
The default path is C:\NET.
272 Appendix C