Installing the pc compatibility card hardware – Apple PC Compatibility Card User Manual
Page 59
59
Installing the Card in a Power Macintosh 8500 or 9500
You won’t need the card extension bracket and screw.
Also, you won’t need the audio cable that has a different plug from the other
two cables (shown below).
Installing the PC Compatibility Card hardware
There are several steps to installing your PC Compatibility Card hardware:
m opening the computer
m inserting the PC Compatibility Card
m connecting the audio cables
m replacing the computer cover
WARNING
The installation of the PC Compatibility Card is technically
complex. Unless you are comfortable installing components inside
computers, Apple recommends that you have the PC Compatibility
Card installed by your Apple-authorized dealer (who may charge a
fee). If you attempt to install the card yourself, any damage you may
cause to your equipment will not be covered by the limited warranty
on your computer.
Do not attempt to install the card, install memory, or connect the cables
without first reading this manual.
Card extension
bracket and screw
Audio cable for
ATAPI CD-ROM drives