Apple PC Compatibility Card - Manual (Page 239)

4 Make sure the DIMM is snapped into place on both ends.
Reinstalling the card
For more detailed instructions, see the section earlier in this manual that
describes installing the card in your model of computer.
1 Insert the card into the slot you removed it from.
2 Reconnect the cables to the card as they were before you began this process.
3 Make sure the cables are routed as shown in the chapter for your computer model earlier
in this manual.
4 Replace the computer cover.
5 Reconnect the equipment cables.
IMPORTANT Make sure you connect your monitor and PC game controller to
the correct ports on the PC Compatibility Card. See Chapter 5 for more
information.
Your PC Compatibility Card is now fully installed with extra memory, and is
ready to use.
When in the “closed” position, the ejector
should engage the small semiround
indentation on the side of the DIMM.
Make sure the DIMM is properly seated
by pressing firmly on both ends.
239 Adding Memory to Your PC Compatibility Card