Apple PC Compatibility Card - Manual (Page 37)

37 Installing the Card in a Power Macintosh 7200, 7300, 7500, or 7600
What you do next depends on whether you are adding a DIMM (dual inline
memory module) to increase the memory available to your PC Compatibility
Card, and whether you are installing a PC Serial and Parallel Card.
m If you want to add memory to your card, turn now to Appendix B, “Adding
Memory to Your PC Compatibility Card.” After you’ve completed the
instructions in Appendix B, go on to the next section, “Inserting the PC
Compatibility Card.”
m If you want to install the PC Serial and Parallel Card, you’ll need to connect
the peripheral flex cable to your PC Compatibility Card now. See the PC
Serial and Parallel Card manual for instructions. Then return to this manual,
and go on to the next section, “Inserting the PC Compatibility Card.”
If you don’t want to add memory or install the PC Serial and Parallel Card, go
on to the next section.
Inserting the PC Compatibility Card
15 Align the card with the first expansion slot.
IMPORTANT Always hold the card by its edges. Don’t touch any of the
components on the card.
Align the card’s connector end (gold in color) with the first PCI expansion
slot. The ports on the card should face the port access opening on the
computer’s back panel.