Apple PC Compatibility Card - Manual (Page 277)

3 Type the following:
A:\SETNET.EXE
The Network Protocol Setup dialog box appears.
You should not need to select an option in the Network Driver area. The
SETNET utility automatically detects the network driver you installed.
4 Select one or more network protocols that you installed by clicking checkboxes in the
“Select Protocol and Frame Type” area.
You can select more than one protocol if you have installed more than one. If
you are only using one protocol, be sure to select its checkbox and leave the
other checkboxes unselected.
5 If you are using TCP/IP, ARP, RARP (TCP/IP), or IPX/SPX, select the appropriate frame
type for each selected protocol by clicking radio buttons in the Select Protocol and
Frame Type area.
6 Click OK.
7 Shut down or exit Windows.
8 Switch to the Mac OS by typing x-Return.
277 Installing Network Client Software