Apple PC Compatibility Card - Manual (Page 93)

9 Remove the port access cover.
What you do next depends on whether you are adding a DIMM (dual inline
memory module) to increase the memory available to your PC Compatibility
Card, and whether you are installing a PC Serial and Parallel Card.
m If you want to add memory to your card, turn now to Appendix B, “Adding
Memory to Your PC Compatibility Card.” After you’ve completed the
instructions in Appendix B, go on to step 10 in this section.
m If you want to install the PC Serial and Parallel Card, you’ll need to
connect the peripheral flex cable to your PC Compatibility Card now. See
the PC Serial and Parallel Card manual for instructions. Then return to this
manual, and go on to step 10 in this section.
If you don’t want to add memory or install the PC Serial and Parallel Card, go
on to step 10.
93 Installing the Card in a Power Macintosh 8600 or 9600