Apple PC Compatibility Card - Manual (Page 265)

11 After running SETNET, make sure your PROTOCOL.INI file contains the following:
PROTOCOL.INI
[NDISHLP$]
DRIVERNAME=NDISHLP$
BINDINGS=MACNDIS$
[PROTMAN$]
DRIVERNAME=PROTMAN$
PRIORITY=NDISHLP$
[DATA]
VERSION=V4.00.950
NETCARDS=MACNDIS$,MACNDIS
[NETBEUI$]
DRIVERNAME=NETBEUI$
LANABASE=0
SESSIONS=10
NCBS=12
BINDINGS=MACNDIS$
[NWLINK$]
DRIVERNAME=NWLINK$
FRAME_TYPE=4
CACHESIZE=0
BINDINGS=MACNDIS$
[MACNDIS$]
DRIVERNAME=MACNDIS$
PROTOCOLDOT2="F0,E0,FF"
12 Shut down Windows 95.
13 Switch to the Mac OS by typing x-Return.
14 Click Restart PC in the PC Setup control panel.
WARNING You must run SETNET every time you add or remove a
network protocol, install or upgrade network software, or change
anything in the network control panel. If you do not run SETNET, you
will experience network problems.
265 Installing Network Client Software