Apple PC Compatibility Card - Manual (Page 233)

Your PC Compatibility Card comes with RAM (random-access memory)
already installed. You can increase the memory available to the card by
installing a DIMM (dual inline memory module) in the DIMM socket.
Memory you add to the card is for the exclusive use of your PC operating
system and may improve the performance of your PC software.
The DIMM socket accepts an 8, 16, 32, or 64 MB 60 ns, 5-volt DIMM. You
may use either EDO or Fast Page Mode memory.
If your PC Compatibility Card is already installed, installing memory on the
card involves the following steps:
m removing the card
m removing the existing DIMM, if one is installed
m installing the new DIMM
m replacing the card
If the card is not installed yet, you only need to install the new DIMM, install
the card, and close the computer.
233
Appendix B
Adding Memory to Your PC Compatibility Card