Apple PC Compatibility Card User Manual

Page 23

Except where noted, the illustrations in this chapter show the 7200 model. If
you have a 7300, 7500, or 7600 model, some of the illustrations may look
slightly different from your computer.

IMPORTANT

If you will be installing a PC Serial and Parallel Card with your PC

Compatibility Card, it’s easiest to install both cards at the same time. The PC
Serial and Parallel Card has standard PC ports that allow you to use several
kinds of PC-compatible peripherals from the Windows or DOS environment
(not from the Mac OS environment). Instructions in this chapter indicate when
to see your PC Serial and Parallel Card manual for installation information.

After you install the PC Compatibility hardware, go to Chapter 5,
“Connecting Monitors and Other Equipment.” If you want to install
additional memory in your card, go to Appendix B, “Adding Memory to Your
PC Compatibility Card.” Then turn to Chapters 6 through 9 to learn more
about installing and using PC software.

WARNING

Shipping your computer with a PC Compatibility Card

installed may cause damage to the card. Your PC Compatibility Card
should be shipped separately. (See Appendix A for instructions on how
to remove the card.)

Installing the Card
in a Power Macintosh 7200, 7300, 7500, or 7600