Apple PC Compatibility Card - Manual (Page 148)

148 Chapter 6
Installing Microsoft Windows
The PC Compatibility Card works with Microsoft Windows 3.1, Windows 3.11,
Windows for Workgroups 3.11, and Windows 95.
You must install DOS and the support software on the PC Compatibility
Card–PC Software floppy disk before installing Windows.
1 In the PC environment, insert the Windows CD-ROM disc or first installation floppy disk.
2 Start the Windows setup program.
If you are installing from floppy disks, type the following:
A:\SETUP
Note: DOS and Windows commands documented in this manual are
formatted showing the command followed by
. When you see this
format type the text and then press Return to execute the command.
If you are installing from a CD-ROM disc, type the following:
E:\SETUP
Note: In this case E represents the letter assigned to your CD-ROM drive.
IMPORTANT If you are installing Windows 95, note the following guidelines
for the installation process:
m If you are installing from floppy disks, make sure to lock your
installation disks.
m Select Continue instead of Retry at the end of disk 2.
m If you choose to make a startup disk, make sure the disk is already
formatted for the PC environment. An unformatted or Macintosh
formatted disk will not be recognized.
m Do not print the test page when you are prompted to do so.
m Do not install any networking software during the Windows 95 installation
process. To install networking software, see Appendix C, “Installing
Network Client Software,” after you have completed the Windows 95
installation process.