Allied Telesis AT-WL2411 - Manual (Page 86)

AT-WL2411 Installation and User’s Guide
86
2. Click Global RF Parameters. The Global RF Parameters screen appears,
as shown in Figure 35.
Figure 35 Global RF Parameters
3. Configure the global RF parameters. Click the links in the Global RF
Parameters menu to set more parameters. The parameters are
explained below.
RFC1042/DIX Conversion
Determines how the access point will handle the conversion of
RFC1042/DIX frames that are received on its 802.11b ports.
Enabled
Causes frames received on an 802.11b port with a protocol
type equal to a value in the “RFC1042 types to pass
through” list to be forwarded without conversion. If the
frame has a protocol types that is not found in the list, it
will be converted to DIX format before it is forwarded.
Disabled
Causes frames received on an 802.11b port to be
forwarded without conversion; that is, when a SNAP frame
is received from an 802.11b radio with an OUI
(Organizationally Unique Identifier) equal to 000000, it will
be forwarded without conversion.