Allied Telesis AT-WL2411 - Manual (Page 68)

AT-WL2411 Installation and User’s Guide
68
Using Predefined Subtype Filters.
You can configure the access point to pass or drop certain predefined
frame subtypes.
To configure predefined subtype filters:
1. From the main menu, click Ethernet and then click Predefined
Subtype Filters. The Predefined Subtype Filters screen appears, as
shown in Figure 26.
Figure 26 Predefined Subtype Filters
2. In each frame subtype field, click the down arrow on the right side of
the Action field and choose Pass or Drop.
3. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.
Customizing Subtype Filters.
You can configure the access point to pass or drop certain customized
frame subtypes. You define the action, subtype, and value parameters.