Allied Telesis AT-WL2411 - Manual (Page 32)

AT-WL2411 Installation and User’s Guide
32
Unpacking the Access Point
To unpack the access point:
1. Remove all components from the shipping package and store the
packaging material in a safe location.
Note
You must use the original shipping material if you need to return the
unit to Allied Telesyn.
2. Place the access point on a level, secure surface.
3. Make sure the following hardware components are included in your
access point package. If any item is missing or damaged, contact your
Allied Telesyn sales representative for assistance.
❑ One AT-WL2411 access point
❑ Mounting bracket
❑ Power supply and AC power cord
❑ Documentation CD